Conditions for Running the DTC

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

DTCs P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0350, P0411, P0412, P0418, P0420, P0606, P0641, P0651, P1350, P2430, P2431, P2432, P2433, P2440 are not set.
The system voltage is between 10-18 volts.
The engine is running.
The start-up engine coolant temperature (ECT) parameter is between 5-50°C (41-122°F).
The start-up intake air temperature (IAT) parameter is between 5-60°C (41-140°F).
The BARO parameter is more than 60 kPa.
The MAF sensor parameter is between 3-24 g/s.
DTC P2444 runs once per trip start-up when the above conditions are met and the AIR pump operation is requested.