Conditions for Setting the DTC
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- The ECM detects that the voltage difference between APP sensor 1 and 2 is more than 0.21 volts.
- The ECM detects that the voltage difference between APP sensor 1 and 2 is more than 0.27 volts with a partially pressed pedal.
- The ECM detects that the voltage difference between APP sensor 1 and 2 is more than 1.07 volts with a fully pressed pedal.
- The ECM detects that the APP sensor 1 voltage is more then 1.17 when leaving the idle range and the voltage difference between APP sensor 1 and 2 is more than 0.04.
- Any of the above conditions exist for less than 4 seconds.