Trim Height Specifications
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Trim Height Specifications
| Vehicle | Suspension RPO |
D (Curb) | J (Curb) | K (Curb) | Z (Curb) |
|---|---|---|---|---|---|
| Buick 4 Door | FE1 | 273 mm (10.7 in) | 238 mm (9.4 in) | 232 mm (9.1 in) | 48 mm (1.9 in) |
| FE2 | 273 mm (10.7 in) | 237 mm (9.3 in) | 235 mm (9.3 in) | 48 mm (1.9 in) |
The Z Height is measured in line with the wheel center:
- 1 represents the center of the rear bushing bolt.
- 2 represents the lowest inboard point on the ball.
The D Height (represented as 1 on the figure) is measured from a point 30 mm outboard of the rear brake hose bracket bolt centerline to the bolt of the trailing arm to the steering knuckle.