Installation Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Sunshade Stop & Screw

Courtesy of GENERAL MOTORS CORP.

Position the sunshade stop to the sunshade track.
Press the sunshade stop into the sunshade track until fully seated.

NOTE: Refer to FASTENER NOTICE in General Information.

Install the sunshade stop screw to the sunshade track.
Tighten: Tighten the sunshade stop screw to 2 N.m (18 lb in).
Install the headliner. Refer to Headliner Replacement in Interior Trim.