Lumbar Replacement - Front Seat

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lumbar - Front Seat

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the front bucket seat. Refer to Seat Replacement - Front Bucket .
1	Handle, Front Seat Recliner
2	Panel, Front Seat Trim
3	Head Restraint Assembly Tip: Push in the button on the head restraint guides to release the head restraint from the seat.
4	Panel, Seat Back Cushion Tip: Pull from the bottom edge of the panel to remove.
5	Guide, Head Restraint (Qty: 2) Tip: Squeeze the bottom of the guide and push upward to remove.
6	Cover, Seat Back Cushion Tip: Remove the hog rings that attach the seat cushion cover to the seat cushion.
7	Pad, Seat Back Cushion
8	Pocket, Seat Back
9	Retainer, Seat Power Lumbar Support (Qty: 5)
10	Support Assembly, Seat Power Lumbar