LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Engine Mechanical - 3.6L (Ly7) (Repair Instructions - 2 Of 5)) >> On-Vehicle Repair Instructions (Part 2) >> Crankshaft Rear Oil Seal and Housing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Crankshaft Rear Oil Seal & Housing
    GM902808Courtesy of GENERAL MOTORS CORP.
  1. Install the crankshaft rear oil seal and housing. Refer to CRANKSHAFT REAR OIL SEAL AND HOUSING INSTALLATION .
  2. Install the oil pan. Refer to Oil Pan Replacement .
  3. Install the engine flywheel. Refer to Engine Flywheel Replacement .
scientia non olet · About LEMON Manuals