LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Engine Mechanical - 3.6L (Ly7) (Repair Instructions - 2 Of 5)) >> Off-Vehicle Repair Instructions (Part 1) >> Camshaft Position (CMP) Actuator Removal - Right Intake

Camshaft Position (CMP) Actuator Removal - Right Intake

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Right Intake Camshaft Position (CMP) Actuator
    GM1579073Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Torque Reaction Against Timing Drive Chain Notice .
  1. Use an open wrench on the hex cast into the camshaft in order to prevent engine rotation when loosening the camshaft position actuator bolt.
  2. Remove the right intake camshaft position actuator bolt.
  3. Remove the right intake camshaft position actuator.
scientia non olet · About LEMON Manuals