Removal Procedure
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the filter. Refer to Oil Filter and Seal Replacement .
- Remove the accumulator bolts (131).
- Remove the manual 2-1 band servo cover bolts (103).
- Remove the accumulator assembly.
- Remove the manual 2-1 band servo (106-116).