LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Automatic Transaxle - 4T65-E - Introduction (2 Of 2)) >> Repair Instructions >> 2-3 Shift Solenoid Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of 2-3 Shift Solenoid & O-Ring
    GM49385Courtesy of GENERAL MOTORS CORP.
  1. Install the O-ring (316) and the 2-3 shift solenoid (315B).
  2. Install the 2-3 shift solenoid retaining clip (314C).
  3. Connect the 2-3 shift solenoid electrical connector.
  4. Install the case side cover. Refer to Case Side Cover Replacement .