Replacing Left Engine Mount Strut: Installation
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Install the engine mount strut.
- Install the bolt and the nut to the left engine mount strut at the left engine mount strut bracket on the upper radiator support.
Tighten: Tighten the engine mount strut bolt to 48 N.m (35 Ft. Lbs.).
- Install the bolt and the nut to the left engine mount strut at the left engine mount strut bracket on the engine.
Tighten: Tighten the engine mount strut nut to 48 N.m (35 Ft. Lbs.).
NOTE:
Refer to Fastener Notice
in General Information.