LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 3.8L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Replacing Left Engine Mount Strut Bracket >> Removal

Replacing Left Engine Mount Strut Bracket: Removal

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the engine coolant from the cooling system. Refer to Draining and Filling Cooling System (L26 Static Fill) or Draining and Filling Cooling System (L26, LY7, GE 47716 Fill) in Engine Cooling.
  2. Remove the engine coolant temperature sensor. Refer to Engine Coolant Temperature (ECT) Sensor Replacement in Engine Controls - 3.8L (L26 and L32).
    3. Fig 1: Left Engine Mount Strut Bolt & Nut
    GM327466Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine mount strut at the left engine mount strut bracket. Refer to Replacing Engine Mount Strut - Left  and Replacing Engine Mount Strut - Right .
    4. Fig 2: Left Engine Mount Strut Bracket & Bolts
    GM35814Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine mount strut bracket bolts.
  5. Remove the engine mount strut bracket.
scientia non olet · About LEMON Manuals