LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 3.8L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Replacing Fuel Injector Sight Shield >> Installation

Replacing Fuel Injector Sight Shield: Installation

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Oil Fill Cap, Oil Fill Tube & Fuel Injector Sight Shield (L26)
    GM911150Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil fill cap (2) and the oil fill tube (3).
  2. Insert the tab of the fuel injector sight shield under the fuel injector sight shield bracket.
  3. Place the hole of the fuel injector sight shield (1) onto the oil fill neck of the valve rocker arm cover.
  4. Install the oil fill tube (3) and the oil fill cap (2).
scientia non olet · About LEMON Manuals