LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 3.8L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Replacing Front Engine Mount >> Removal

Replacing Front Engine Mount: Removal

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Remove the tire and wheel. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION in Tires and Wheels.
  3. Remove the engine splash shield. Refer to SPLASH SHIELD REPLACEMENT - ENGINE in Body Front End.
    4. Fig 1: Identifying Engine Mount-To-Engine Mount Bracket Nuts
    GM43405Courtesy of GENERAL MOTORS CORP.
  4. Remove the motor mount to motor mount bracket nuts.
    5. Fig 2: Motor Mount & Frame Nuts
    GM1212272Courtesy of GENERAL MOTORS CORP.
  5. Remove the motor mount to frame nuts.
  6. Using a suitable jackstand, raise the engine.
  7. Remove the motor mount from the vehicle.
scientia non olet · About LEMON Manuals