Replacing Engine Oil Level Sensor and/or Switch: Removal

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Engine Oil Drain Plug

Courtesy of GENERAL MOTORS CORP.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Remove the engine oil drain plug in order to drain the engine oil.

Fig 2: Oil Level Sensor

Courtesy of GENERAL MOTORS CORP.

Disconnect the oil level sensor electrical connector.
Remove the engine oil level sensor from the oil pan.