LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Removing Timing Chain and Sprockets (L26)

Removing Timing Chain and Sprockets (L26)

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Aligning Timing Chain & Sprocket Timing Marks
    GM192708Courtesy of GENERAL MOTORS CORP.
  1. Align the timing marks on the sprockets.
  2. Fig 2: View Of Timing Chain Dampener
    GM154523Courtesy of GENERAL MOTORS CORP.
  3. Remove the timing chain dampener.
  4. Fig 3: Timing Chain, Crankshaft Sprocket & Camshaft Sprocket (L26)
    GM192716Courtesy of GENERAL MOTORS CORP.
  5. Remove the camshaft sprocket bolt.
  6. Remove the camshaft sprocket.
  7. Remove the timing chain.
  8. Remove the crankshaft sprocket.
  9. Remove the crankshaft balancer key.
  10. Fig 4: Balance Shaft Drive Gear (L26)
    GM154519Courtesy of GENERAL MOTORS CORP.
  11. Remove the balance shaft drive gear.