LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Removing Camshaft Bearing >> Removal

Removing Camshaft Bearing: Removal

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Camshaft Bearing Service Set
    GM622704Courtesy of GENERAL MOTORS CORP.
  1. Select the expander assembly and driving washer.
  2. Assemble J 33049  . See Special Tools .
    3. Fig 2: Identifying Camshaft Bearings
    GM683961Courtesy of GENERAL MOTORS CORP.
  3. Drive out the camshaft bearings.
scientia non olet · About LEMON Manuals