LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Removing Balance Shaft Bearing And/Or Bushing >> Removal

Removing Balance Shaft Bearing And/Or Bushing: Removal

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Using J 36995 To Remove Balance Shaft Bearing & Bushing
    GM36706Courtesy of GENERAL MOTORS CORP.
  1. Use J 36995  to remove the balance shaft bearing. See Special Tools .
  2. Use J 36995  to remove the balance shaft bushing. See Special Tools . It may take a considerable amount of force to loosen the bushing from the block bore.
scientia non olet · About LEMON Manuals