LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Installing Valve Rocker Arm Cover - Right >> Installation

Installing Valve Rocker Arm Cover - Right: Installation

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Right Valve Rocker Arm Cover
    GM63414Courtesy of GENERAL MOTORS CORP.
  1. Install the valve rocker arm cover.
  2. Apply GM P/N 12345382 (Canadian P/N 10953489) threadlocker or the equivalent to the threads.
    3. NOTE: Refer to Fastener Notice in General Information.
  3. Install the valve rocker arm cover bolts.

    Tighten:  Tighten the valve rocker arm cover bolts to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals