LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Installing Engine Flywheel >> Installation

Installing Engine Flywheel: Installation

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Engine Flywheel & Bolts
    GM36665Courtesy of GENERAL MOTORS CORP.
  1. Install the flywheel.
    2. NOTE: Refer to Fastener Notice in General Information.
  2. Install the new flywheel bolts.

    Tighten:  Tighten the bolts to 15 N.m (11 Ft. Lbs.). Use the J 45059  to tighten the bolts an additional 50 degrees.

scientia non olet · About LEMON Manuals