LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Mechanical - 3.8L) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Balance Shaft Cleaning & Inspection

Balance Shaft Cleaning & Inspection

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cleaning/Inspecting Balance Shaft
    GM388909Courtesy of GENERAL MOTORS CORP.
  1. Clean the balance shaft.
  2. Inspect the balance shaft bearing/bushing journals for excessive wear.
  3. Inspect the balance shaft driven gear and the balance shaft drive gear for nicks and burrs.
  4. Inspect the balance shaft retainer for damage.
  5. Inspect the balance shaft threads for damage.
  6. Repair or replace the balance shaft components as necessary.