LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Lock Cylinder Replacement - Instrument Panel (I/P) Compartment Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Depressing Retainer Tumbler Through Poke Hole
    GM641756Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel compartment latch. Refer to Latch Replacement - Instrument Panel (I/P) Compartment .
  2. Insert the key into the instrument panel compartment lock cylinder.
  3. Rotate the instrument panel compartment lock cylinder clockwise to the 3 o'clock position with the key.
  4. With the key in position, apply a light load and depress the retainer tumbler through the poke hole at the left hand side of the instrument panel compartment latch.
    5. Fig 2: Rotating Key To 5 O'Clock
    GM641556Courtesy of GENERAL MOTORS CORP.
  5. Rotate the key until the instrument panel compartment lock cylinder rotates to about the 5 o'clock position.

    This will line up the notch at the rear of the instrument panel compartment lock cylinder with the tab in the instrument panel compartment latch housing.

    6. Fig 3: Identifying I/P Compartment Door Lock Cylinder
    GM641536Courtesy of GENERAL MOTORS CORP.
  6. Remove the instrument panel compartment lock cylinder from the instrument panel compartment latch by pulling on the key.
scientia non olet · About LEMON Manuals