LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Ambient Air Temperature Gage Sensor
    GM1357195Courtesy of GENERAL MOTORS CORP.
  1. Remove the radiator sight shield. Refer to Radiator Support Sight Shield Replacement .
  2. Disconnect the electrical connector from the ambient air temperature sensor (1).
  3. Release the tabs on the sensor and remove the ambient air temperature sensor (1) from the front fascia (2).
scientia non olet · About LEMON Manuals