LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Ambient Air Temperature Gage Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Ambient Air Temperature Gage Sensor
    GM1357195Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the ambient air temperature sensor (1).
  2. Install the ambient temperature sensor (1) to the front fascia (2).
  3. Install the radiator sight shield. Refer to Radiator Support Sight Shield Replacement .
scientia non olet · About LEMON Manuals