Installation Procedure
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Install the battery tray.
- Install the battery tray bolts.
Tighten: Tighten the battery tray bolts to 5 N.m (44 lb in).
- Install the battery. Refer to Battery Replacement (L26) or Battery Replacement (LY7) .
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (L26) or Battery Negative Cable Disconnect/Connect Procedure (LY7) .
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.