Charge Indicator Operation
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
The instrument panel cluster (IPC) illuminates the charge indicator in the message center when the one or more of the following occurs:
- The ECM/PCM detects that the generator output is less than 11 volts or greater than 16 volts. The IPC receives a class 2 message from the ECM/PCM requesting illumination.
- The IPC determines that the system voltage is less than 11.3 volts or greater than 16.2 volts for more than 30 seconds. The IPC receives a class 2 message from the body control module (BCM) indicating there is a system voltage range concern.
- The IPC performs the displays test at the start of each ignition cycle. The indicator illuminates for approximately 3 seconds.
- The ignition is ON, with the engine OFF.