LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Wiper System & Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Wiper Blade & Wiper Arm
    GM815213Courtesy of GENERAL MOTORS CORP.
  1. Install the hook of the wiper arm through the opening in the wiper blade.
    2. Fig 2: Removing/Installing Wiper Blade Clip Button & Wiper Arm
    GM815214Courtesy of GENERAL MOTORS CORP.
  2. Position the wiper blade pivot in the inside radius of the wiper arm hook.
  3. Press the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
  4. Operate the windshield wipers and inspect for proper operation.
scientia non olet · About LEMON Manuals