Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Open the hood.
Drain the washer solvent from the washer solvent container.
Remove the right front fender liner. Refer to Fender, Fender Insulator, Wheelhouse Liner Replacement - Front in Body Front End.

Fig 1: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor

Courtesy of GENERAL MOTORS CORP.

Disconnect the washer pump electrical connector.
Disconnect the washer pump hose.
Use a small flat-bladed tool to remove the washer pump from the washer solvent container.
Use a small flat-bladed tool to remove the seal from the washer solvent container.