LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Body Front End) >> Repair Instructions >> Seal Replacement - Hood Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open and support the hood.
  2. Fig 1: Removing/Installing Plenum-To-Hood Weather Strip
    GM317839Courtesy of GENERAL MOTORS CORP.
  3. Starting at the center of the weatherstrip, pull the weatherstrip forward and pull the weatherstrip off of the flange.
  4. Remove the weatherstrip from the flange.