LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Rear Quarter Upper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Trim Panel - Rear Quarter Upper
    GM1283311Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat back. Refer to Seat Back Replacement - Rear (Non-folding) or Seat Back Replacement - Rear (Folding) .
  2. Remove the door weatherstrip from the pinch weld flange to expose the upper quarter trim panel.
  3. Remove the screw cover and screw in the top of the panel (1).
  4. Use J 38778  to disengage the push-in retainers and remove the trim panel.
scientia non olet · About LEMON Manuals