Seat Cushion Frame Replacement - Front

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Seat Cushion Frame Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the front bucket seat. Refer to Seat Replacement - Front Bucket . Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Passenger Presence System Rezeroing Procedure .
1	Handle, Seat Recliner Refer to Seat Back Recliner Handle Replacement - Front .
2	Cover, Seat Adjuster Finish Cover Refer to Seat Adjuster Track Cover Replacement - Front .
3	Cover, Seat Cushion Refer to Seat Cushion Cover Replacement - Front .
4	Heater Assembly, Seat Cushion Tip: Disconnect the electrical connector.
5	Pad, Seat Cushion
6	Bolt, Seat Cushion (Qty: 4) Tighten: 25 N.m (18 lb ft)
7	Frame Assembly, Seat Cushion