Seat Back Pad Replacement - Front

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Seat Back Pad Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the front bucket seat. Refer to Seat Replacement - Front Bucket .
1	Head Restraint Assembly Tip: Push in the button on the head restraint guides to move the head restraint up. Using a pick type tool, install the pick tool in the small opening on the head restraint guide to release the head restraint from the guides.
2	Panel, Seat Back Cushion Tip: Pull from the bottom edge of the panel to remove.
3	Retainer, Seat Back Cushion Panel (Qty: 4)
4	Guide, Head Restraint (Qty: 2) Tip: Squeeze the bottom of the guide and push upward to remove.
5	Cover, Seat Back Cushion Trim
6	Pad, Front Seat Back
7	Panel, Seat Back Frame
8	Retainer Clip, Seat Back Frame Panel (Qty: 2)