Seat Back Cover Replacement - Front

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Back Seat Back Cover Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the front bucket seat. Refer to Seat Replacement - Front Bucket .
1	Pocket, Seat Back Cushion
2	Retainer, Seat Back Cushion Pocket (Qty: 4)
3	Panel, Seat Back Cushion Tip: Pull from the bottom edge of the panel to remove.
4	Retainer Clip, Seat Back Cushion Panel (Qty: 2)
5	Head Restraint Assembly Tip: Push in the button on the head restraint guides to release the head restraint from the seat.
6	Guide, Head Restraint (Qty: 2) Tip: Squeeze the bottom of the guide and push upward to remove.
7	Cover, Seat Back Cushion Tip: Remove the hog rings that attach the seat cushion cover to the seat cushion.