Installation Procedure
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Position the rear compartment lid latch to the alignment marks on the rear compartment lid.
- Install the rear compartment lid latch to rear compartment lid nuts.
Tighten: Tighten the nuts to 10 N.m (89 lb in).
- Connect the electrical connectors to the rear compartment lid latch.
- Connect the lock cylinder actuator cable to the lock cylinder.
- Install rear compartment lid carpet. Refer to Compartment Lid Trim Replacement - Rear
- Close the rear compartment.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.