LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Body Rear End) >> Repair Instructions >> Hinge Replacement - Rear Compartment Lid >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the rear compartment.
  2. Use a grease pencil to mark the hinge to the rear compartment lid for the location at installation.
  3. Disconnect the lid harness in the rear compartment.
  4. Remove the rear compartment hinge to lid nuts. Refer to Compartment Lid Replacement - Rear .
  5. Remove the rear compartment struts. Refer to Strut Replacement - Rear Compartment Lid .
    6. Fig 1: Removing/Installing Rear Compartment Hinge
    GM324455Courtesy of GENERAL MOTORS CORP.
  6. Use a grease pencil to mark the quarter panel hinge to the quarter panel. The mark will help you align the hinge at installation.
  7. Remove the bolts that attach the hinge to the rear quarter.
  8. Remove the hinge from the quarter panel.
scientia non olet · About LEMON Manuals