LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Engine Control System - 3.8L - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine/Chassis >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Pipe Routing
    GM189079Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel hose/pipe bundle. Refer to Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine/Chassis .
  2. Remove the evaporative emission (EVAP) purge pipe from the fuel bundle.
scientia non olet · About LEMON Manuals