Ignition Coils
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Each ignition coil contains a solid state driver module as its primary element. The engine control module (ECM) signals the coil driver to initiate a firing event by applying ignition control (IC) circuit voltage for the appropriate time or dwell. When the voltage is removed the coil fires the spark plug. The ignition coils use the following circuits:
- An ignition 1 voltage supply circuit
- An IC circuit
- Two ground circuits