Removal Procedure
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the left instrument panel (I/P) insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
- Remove the lower pillar garnish molding. Refer to Garnish Molding Replacement - Lower Pillar in Interior Trim.
- Disconnect the antenna extension cable (1) from the antenna cable.
- Disconnect the antenna extension cable from the communication interface module. The cable is on the passenger side of the module.
- Cut off the visible ends of the antenna extension cable.