Removal Procedure
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the right instrument panel (I/P) insulator. Refer to Closeout/Insulator Panel Replacement - Right .
- Remove the passenger lower pillar trim. Refer to Garnish Molding Replacement - Lower Pillar .
- Pull back the carpet for access.
- Disconnect the body antenna cable from the I/P mobile telephone antenna cable.
- Disconnect the I/P antenna cable from the communication interface module by pulling down on the square plastic housing.
- Cut off the visible ends of the I/P antenna cable.