Windshield Pillar Garnish Molding Replacement

Fig 1: Removing/Installing Windshield Pillar Garnish Molding

Courtesy of GENERAL MOTORS CORP.

Windshield Pillar Garnish Molding Replacement

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
1	Windshield Side Garnish Molding Cover
2	Windshield Side Garnish Screw Tighten:  9 N.m (80 lb in)
3	Windshield Garnish Molding Assembly Tip:  Disconnect the electrical connector.