Center Pillar Upper Garnish Molding Replacement

Fig 1: Identifying Center Pillar Upper Garnish Molding

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedures: Disable the roof rail SIR system. Refer to SIR Disabling and Enabling .
1	Cover, Upper Garnish Molding
2	Screw, Upper Garnish Molding Tighten: 2 N.m (18 lb in)
3	Panel Assembly, Center Pillar Upper Trim Remove the seat belt D-ring from the adjuster assembly. Tighten: 35 N.m (25 lb ft) Pull the trim panel toward the inside of the vehicle to disengage the retainers.