LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel Trim And Console Trim >> Repair Instructions >> Console Replacement

Console Replacement

Fig 1: Removing/Installing Console
GM1615582Courtesy of GENERAL MOTORS CORP.
Console Replacement

Callout Component Name
NOTE: Refer to Fastener Notice .
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Remove the right and left console trim panels. Refer to Front Floor Console Side Trim Panel Replacement - Right Side  and Front Floor Console Side Trim Panel Replacement - Left Side .
  2. Remove the front floor console trim plate. Refer to Front Floor Console Trim Plate Replacement .
1 Bolt, Front Floor Console (Qty: 4)

Tighten:  9 N.m (80 lb in)

2 Screw, Front Floor Console (Qty: 2)

Tighten:  2 N.m (18 lb in)

3 Console Assembly, Front Floor Console
Tip:  Disconnect the electrical connector.