LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Rear Compartment Lid Hinge Torque Rod Replacement >> Removal Procedure

Removal Procedure

    CAUTION: When a rear compartment lid hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
    Fig 1: Identifying Torque Rod Adjuster
    GM333514Courtesy of GENERAL MOTORS CORP.
  1. Support the rear compartment lid in the fully up position.
  2. Use the J 41358-A  in order to disconnect the torque rod from the rear compartment lid hinge.
scientia non olet · About LEMON Manuals