Front End Upper Tie Bar Replacement
Front End Upper Tie Bar Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the sight shield. Refer to Front Compartment Sight Shields Replacement . |
|
| 1 | Front Latch Support Bolt (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 10 N.m (89 lb in) |
| 2 | Upper Tie Bar Bolt (Qty: 4) Tighten: 50 N.m (37 lb ft) |
| 3 | Upper Tie Bar |