Instrument Cluster Replacement
Instrument Cluster Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the instrument panel cluster trim plate. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement
. |
|
| 1 | Instrument Panel Cluster Assembly Screws (Qty: 4) Tighten: 2 N.m (18 lb in) |
| 2 | Instrument Panel Cluster Assembly Tip: Disconnect the electrical connection. Refer to Control Module References for programming and setup information. |