Heater Inlet Hose Replacement (3.6L)
Heater Inlet Hose Replacement (3.6L)
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications .Preliminary Procedure: Drain the cooling system. Refer to Draining and Filling Cooling System (GE 47716 Fill)
or Draining and Filling Cooling System (L26 Static Fill)
or Draining and Filling Cooling System (LY7 Static Fill)
in Engine Cooling. |
|
| 1 | Hose, Heater Inlet Tip: Use J 38185 hose clamp plier to release the clamp on the radiator inlet hose. |
| 2 | Hose, Heater Outlet Tip: Use J 38185 hose clamp plier to release the clamp on the heater hose. |