Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0010, P0013, P0016, P0017, P0018, P0019, P0020, P0023, P0341, P0342, P0343, P0346, P0347, P0348, P0366, P0367, P0368, P0391, P0392, P0393, P2088, P2089, P2090, P2091, P2092, P2093, P2094, and P2095 are not set.
The engine is operating for more than 1 second.
The ECM completed the CMP actuator solenoid output driver test.
The engine speed is more than 520 RPM.
DTC P1011, P1012, P1013, and P1014 only runs on an engine start-up.