LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical - 3.6L - 3 Of 5) >> Off-Vehicle Repair Instructions (2 Of 4) >> Intake Manifold Cleaning and Inspection >> Lower Intake Manifold Cleaning Procedure

Lower Intake Manifold Cleaning Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove any remaining gasket and/or gasket material from the following:
    • Upper-to-lower intake manifold sealing surface
    • Cylinder head-to-lower intake manifold sealing surface
  2. Clean the following intake manifold areas in solvent.
    • Intake manifold gasket sealing surfaces
    • Intake manifold passages
  3. CAUTION: Refer to Safety Glasses Caution in Cautions and Notices.
  4. Dry the intake manifold with compressed air.