LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical - 3.6L - 3 Of 5) >> Off-Vehicle Repair Instructions (2 Of 4) >> Engine Front Cover Disassemble

Engine Front Cover Disassemble

WARNING: This page is about a different variant/trim than selected.
Tools Required

J 45000  Seal Remover. See Special Tools

    Fig 1: View Of Crankshaft Front Oil Seal
    GM1408419Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft front oil seal from the engine front cover using the J 45000  . See Special Tools .
  2. Fig 2: Locating Camshaft Position Actuator Valve Oil Seals
    GM1408421Courtesy of GENERAL MOTORS CORP.
  3. Remove the camshaft position actuator valve oil seals from the engine front cover.
  4. Fig 3: Identifying Water Pump Seal
    GM1211002Courtesy of GENERAL MOTORS CORP.
  5. Remove the water pump seal from the engine front cover.
  6. Discard the water pump seal.