LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 3.6L - 2 Of 5) >> On-Vehicle Repair Instructions (2 Of 2) >> Crankshaft Rear Oil Seal and Housing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the engine flywheel. Refer to Engine Flywheel Replacement .
  2. Remove the oil pan. Refer to Oil Pan Replacement .
    3. Fig 1: View Of Crankshaft Rear Oil Seal And Housing
    GM902808Courtesy of GENERAL MOTORS CORP.
  3. Remove the crankshaft rear oil seal and housing. Refer to Crankshaft Rear Oil Seal and Housing Removal .
scientia non olet · About LEMON Manuals