LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Allure CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Mechanical - 3.6L - 2 Of 5) >> Off-Vehicle Repair Instructions (1 Of 4) >> Water Pump Removal

Water Pump Removal

WARNING: This page is about a different variant/trim than selected.
Tools Required

EN 46104  Water Pump Pulley Holding Tool

    Fig 1: EN 46104 Installed On Water Pump Pulley
    GM1412158Courtesy of GENERAL MOTORS CORP.
  1. Install the EN 46104  onto the water pump pulley.
    2. Fig 2: Locating Water Pump Pulley & Bolts
    GM1412160Courtesy of GENERAL MOTORS CORP.
  2. Remove the water pump pulley bolts.
  3. Remove the water pump pulley.
    4. Fig 3: Identifying Water Pump Components
    GM1412162Courtesy of GENERAL MOTORS CORP.
  4. Remove the water pump bolts.
  5. Remove the water pump from the front cover.
  6. Remove the water pump gasket.
scientia non olet · About LEMON Manuals